SuperATV Polaris Ranger XP 1000 RackBoss 2.0 Rack and Pinion

Overview

The SuperATV Polaris Ranger XP 1000 RackBoss 2.0 Rack and Pinion is a premium rack and pinion system designed for enhanced performance and control. Whether you’re tackling rugged trails, sandy dunes, or rocky climbs, this robust system is built for superior durability and responsiveness.

Key Features of SuperATV Polaris Ranger XP 1000 RackBoss 2.0 Rack and Pinion

• Heavy-Duty Dual PTFE Bushings

  – Designed with advanced X24 Tech, these bushings reduce wear by over 50% for unparalleled durability.

• 65% Larger Housing

  – The larger housing compared to stock ensures superior strength and performance under tough conditions.

• Multiple Tie Rod Options

  – Choose from swaged tube, solid steel bar, or billet aluminum hex for customized strength and performance.

• Easy Maintenance Grease Fittings

  – Built-in fittings allow for straightforward upkeep, extending the lifespan of your rack and pinion system.

Why Choose SuperATV Polaris Ranger XP 1000 RackBoss 2.0 Rack and Pinion?

The SuperATV Polaris Ranger XP 1000 RackBoss 2.0 Rack and Pinion is an essential upgrade for riders looking to enhance their off-road experience. Built with high-quality materials, this rack and pinion system ensures superior performance on any terrain, allowing you to tackle challenges with confidence.

Frequently Asked Questions (FAQs)

• Will this fit my machine? See below for fitment.
• Is installation difficult? No, installation is quick and easy with basic tools.
• How does this compare to similar products? This rack and pinion system stands out due to its advanced dual-bushing design and larger housing.

What Customers Are Saying

“This RackBoss 2.0 has completely changed my ride! The steering feels tight and responsive.” – Mark R.

“Installation was straightforward, and the durability is impressive. Perfect for my off-road adventures!” – Lisa J.

“I love the dual-bushing design! It made a world of difference when navigating rough terrains.” – Tom S.

Optimize Your Experience with Accessories

Pair the SuperATV Polaris Ranger XP 1000 RackBoss 2.0 Rack and Pinion with other premium accessories for enhanced performance. Browse our collection of compatible products to complete your setup.

Get Yours Today

Upgrade your off-road experience with the SuperATV Polaris Ranger XP 1000 RackBoss 2.0 Rack and Pinion. Designed for durability and performance, this is the perfect addition for any serious rider.

Customers Also Searched For

• Best rack and pinion systems for Polaris Ranger
• Top-rated steering racks for off-road performance
• Durable and reliable UTV accessories
• High-quality steering solutions for extreme terrain

SuperATV Polaris Ranger XP 1000 RackBoss 2.0 Rack and Pinion
The SuperATV Polaris Ranger XP 1000 RackBoss 2.0 Rack and Pinion is the ultimate upgrade for your off-road vehicle, designed specifically for the Polaris Ranger XP 1000. Built with advanced X24 Tech, its dual-bushing design reduces wear by over 50%, ensuring that your steering remains responsive and reliable even under the toughest conditions. Whether you’re tackling boulder fields or muddy trails, this robust rack and pinion system allows for bigger tires and enhanced control, giving you the confidence to ride anywhere.

Key Features

• Heavy-duty dual PTFE bushings with X24 Tech to prevent wear and improve durability.
• Available tie rod options: swaged tube, solid steel bar, and billet aluminum hex.
• 65% larger housing than stock for superior strength and performance.
• Grease fittings for easy maintenance and longevity.
• Includes all necessary hardware and detailed instructions for straightforward installation.

Why Buy This Product?
The SuperATV Polaris Ranger XP 1000 RackBoss 2.0 Rack and Pinion is engineered for off-road enthusiasts who demand the best. With its advanced technology, robust materials, and superior design, this rack and pinion system guarantees a smoother, more controlled ride, allowing you to conquer any terrain with ease and confidence.

Product Specifications

• Model: RackBoss 2.0
• Application: Compatible with Polaris Ranger XP 1000 and variants
• Recommended Maintenance: Every 15,000 cycles
• Material: Steel tube, solid steel bar, or 6061 billet aluminum
• Dimensions: 65% larger housing than stock

FAQs

• How often should I service this product? Every 15,000 cycles to maintain optimal performance.
• Is this product custom-built? Yes, the RackBoss 2.0 is specifically designed for the Polaris Ranger XP 1000.
• Can I adjust the product settings? Yes, the grease fittings allow for easy maintenance and adjustments.

Customer Reviews
“This RackBoss 2.0 has completely changed my ride! The steering feels tight and responsive.”
“Installation was straightforward, and the durability is impressive. Perfect for my off-road adventures!”
“I love the dual-bushing design! It’s made a world of difference when navigating rough terrains.”

Get Yours Today
Dont miss out on the opportunity to enhance your off-road capabilities with the SuperATV Polaris Ranger XP 1000 RackBoss 2.0 Rack and Pinion. With its unmatched strength and performance, this product is a must-have for serious off-road enthusiasts.

Customers Also Searched For

• High-performance steering racks for Polaris Ranger
• Durable rack and pinion systems for UTVs
• Upgraded suspension parts for Polaris Ranger XP 1000

Note: If you have any fitment questions please call us. 801-899-2520

SuperATV Polaris Ranger XP 1000 RackBoss 2.0 Rack and Pinion

Whether you use stock or youve upgraded to an aftermarket rack, one thing is always true: the responsiveness of your steering is going to get worse over time. Or at least that was true until RackBoss 2.0. Its our updated and upgraded version of the original RackBoss thats built to be the strongest, most durable rack you can get. It uses our X24 Techa dual-bushing design only in RackBoss 2.0to reduce wear by over 50%. So install SuperATVs RackBoss 2.0 Rack and Pinion on your Polaris Ranger XP 1000. With it, you can run bigger tires, take on treacherous terrain, and ride with confidence everywhere you go.

Minimizes Wear and Tear with Our Dual-Bushing Design: We use a dual PTFE bushing design to prevent the wear and tear that youre used to. Thanks to our X24 Tech, which uses tough bushings at both ends of the rack, RackBoss 2.0 can power through bigger hits with larger tires without getting sloppy steering. You get like-new operation that lasts longer than any other Ranger 1000 steering rack. Plus, the built-in grease fittings allow you to push out all the crud that can get in when you go hard in mud or water. Its only possible with RackBoss 2.0.

Swaged Tube Tie Rods: Our swaged tube tie rods are tough but lightweight. The flared-out steel tube design boosts the strength beyond what a standard 7/8 tube would have. Plus, it comes paired with our unbeatable tie rod ends that use 16 mm rack threads and huge 14 mm rod threads. They wont let you down.

Solid Steel Bar Tie Rods: Solid steel bar tie rods give you the robust strength you need to ride through rough terrain. Theyre perfect for turning big tires through slop and navigating boulder fields. The 1 diameter steel rod is paired with beefy tie rod ends3/4 outer tie rods and rebuildable inner tie rods that use 3/4 rod threads and 16 mm rack threads. All that strength lets you get wild.

Billet Aluminum Hex Tie Rods: If you want the strongest, lightest, and best looking tie rods for your Ranger 1000, you want our billet aluminum hex tie rods. The polished billet construction is big and beefy, giving you the long-term durability you want without adding a ton of weight. They come complete with our oversized 3/4 outer tie rod ends and rebuildable inner tie rod ends that use 3/4 rod threads and 16 mm rack threads. For the biggest builds, hardest rides, and neck-turning good looks, these are the tie rods for you.

Looking for a More Traditional Rack: If you dont need all the benefits of a RackBoss 2.0, you can dial it back to our original, more traditional RackBoss 1.0. It uses the same beefy housing but doesnt include the extra PTFE bushing. Our RackBoss 1.0 Rack and Pinion comes with steel swaged tubes that are tougher than stock and perfect for casual riders looking for an upgrade. Its finished with our tough 14 mm inner and outer tie rod ends so you can ride harder without worry.

Features:

RackBoss 2.0 Features:

• Heavy-duty dual PTFE bushings:
  • Designed with X24 Tech
  • Prevents wear
  • Reduces slop
  • Improves overall durability
• Available tie rod options:
  • Swaged tube
  • Solid steel bar
  • Billet aluminum hex
• Solid steel and billet aluminum tie rods use:
  • 3/4 outer tie rod ends
  • Rebuildable inner tie rod ends that use 3/4 rod threads and 16 mm rack threads
• Swaged tube tie rods use:
  • 14 mm outer tie rod ends
  • Rebuildable inner tie rod ends that use 3/4 rod threads and 16 mm rack threads
• 65% larger housing than stock
• Over 50% less wear than OEM after 15,000 cycles
• Grease fitting for rack gears

RackBoss 1.0 Features:

• Uses a single PTFE bushing
• 65% larger housing than stock
• Less wear than stock
• Uses steel swaged tie rods
• 14 mm inner and outer tie rod ends
• Includes all hardware and instructions

Fitment:

• Polaris Ranger XP 1000 : 2017+
• Polaris Ranger XP 1000 Crew : 2017+
• Polaris Ranger XP 1000 High Lifter Edition : 2017+
• Polaris Ranger XP 1000 High Lifter Edition Crew : 2017+
• Polaris Ranger XP 1000 NorthStar Edition : 2019+
• Polaris Ranger XP 1000 NorthStar Edition Crew : 2019+
• Polaris Ranger XP 1000 Back Country Edition : 2019
• Polaris Ranger XP 1000 Back Country Crew Edition : 2019
• Polaris Ranger XP 1000 Texas Edition : 2020+
• Polaris Ranger XP 1000 Texas Edition Crew : 2020+
• Polaris Ranger XP 1000 Trail Boss : 2021+
• Polaris Ranger XP 1000 Trail Boss Crew : 2021+
• Polaris Ranger XP 1000 Waterfowl Edition : 2021+
• Polaris Ranger XP 1000 Waterfowl Edition Crew : 2021+
• Polaris Ranger XP 1000 Big Game Edition : 2021+
• Polaris Ranger XP 1000 Big Game Edition Crew : 2021+

Instructions:

• Instructions – HDRP-P-RAN1K-001
• Instructions – SDRP-P-RAN1K
• Instructions – SDRP-P-RAN900
• HDRP-1-34-002 – Instructions

	RackBoss 1.0 Swaged Tie Rod	RackBoss 2.0 Swaged Tie Rod	RackBoss 2.0 Solid Steel Tie Rod	RackBoss 2.0 Billet Tie Rod
Price	$349.95	$399.95	$499.95	$599.95
X24 Tech Dual-Bushing Design
Tie Rod Material	Steel tube	Steel tube	Solid steel bar	6061 Billet aluminum
Inner Ball and Socket Thread Diameter	14 mm	14 mm rod threads, 16 mm rack threads	3/4 rod threads, 16 mm rack threads	3/4 rod threads, 16 mm rack threads
Outer Tie Rod End Thread Diameter	14 mm	14 mm	3/4	3/4
Greasable
Inner Boots
Steering Stop Kit
Misalignment Bushings, Tie Rod Studs, & Hardware