Bikeman Performance Polaris RZR Pro R Brain Crower High Performance Cam Shafts

Bikeman Performance Polaris RZR Pro R Brain Crower High Performance Cam Shafts

Unlock the true potential of your Polaris RZR Pro R with the Bikeman Performance High Performance Cam Shafts, developed in collaboration with industry experts at Brian Crower. These camshafts are designed for maximum performance without compromising reliability, making them the perfect upgrade for your off-road adventures.

Key Features:

• Drop-in Camshafts: Easy installation with no need for additional head upgrades.
• Proven Performance: Extensive dyno testing has resulted in peak performance gains.
• Impressive Power Boost: Achieve stock horsepower of approximately 230-235hp at the flywheel, increasing to 270hp with our Torque Link tune and slip on.
• Extra Performance: Gain an additional 30hp at 8650 rpm, reaching up to 300hp at the crank when combined with our Cams, Tune, and Slip on exhaust.

Installation Notes:

Ensure optimal performance by carefully following these recommended steps:

1. Roll the engine over by hand at least 10 revolutions clockwise from the rear.
2. Check cam timing to ensure it is accurate.
3. Verify that coolant and oil levels are correct before starting the engine.
4. Start the engine and maintain RPMs above 2000 until it reaches 170 degrees F.
5. Gradually drop RPM by 50 every 30 seconds until idle becomes unstable. Maintain this unstable RPM until stability is achieved, then repeat.
6. Once stable at 1450 RPM with no throttle input, let the machine idle for 10-15 minutes to complete the break-in process.

Note: On higher duration cams, a little throttle during startup may be necessary; this is normal.

For detailed instructions, please refer to the following video: Installation Guide.

Transform your Polaris RZR Pro R into a powerhouse with the Bikeman Performance Cam Shafts where performance meets reliability!